2024 Komatsu Wheel Loaders WA600-8
- Year 2024
- Make Komatsu
- Model Wheel Loaders
- Engine Model: SAA6D170E-7
2024 Komatsu Wheel Loaders WA600-8
2024 Komatsu Wheel Loaders WA600-8
A powerful, fuel-efficient wheel loader that is easy to operate
High breakout force makes this wheel loader ideal for tough digging applications. A quiet cab and the advanced joystick steering system enhance operator comfort.
Features may include:
New bucket design- A new bucket design helps make this loader up to 7% more productive.
- The Advanced Joystick Steering System (AJSS) and Electronic Pilot Control (EPC) work equipment controls work in tandem to make this wheel loader easy to operate.
- Maximum rimpull can be adjusted from 100% to 20% to match ground conditions and reduce tire slippage.
- The engine’s RPM can be set to a constant speed for faster cycle times, while the auto-deceleration feature lowers the engine to low idle when an operator command is not sensed, which can help reduce fuel consumption.
- The modulation clutch controls the tractive effort with the left brake pedal from 100% to 20% of available rimpull output, enabling smooth approaches and speed reduction when loading haul trucks.
Engine
Engine Manufacturer
Komatsu
Engine
Model: SAA6D170E-7
Engine Torque (rpm)
1,800 rpm
Engine Power
SAE J1995 - Gross: 530 HP | ISO 9249/SAE J1349 - Net: 529 HP
Engine Type
4-cycle
Aspiration
Komatsu variable geometry, turbo-charged, after-cooled, cooled EGR
Cylinder Liners
6
Bore
6.69 in
Stroke
6.69 in
Displacement
1,413 in³
Cooling System
Water-cooled
Lubrication
Gear pump, force-lubrication
Drivetrain
Governor
All-speed, electronic
Transmission
Automatic full-powershift, countershaft type
Drive System
Four-wheel drive
Axle Bearing Extensions, Front
Fixed, full-floating
Axle Bearing Extensions, Rear
Center-pin support, full-floating, 22° total oscillation
Gears
Reduction: Spiral bevel gear | Diferential: Conventional type | Final reduction: Planetary gear, single reduction
Steering
Articulated type, full-hydraulic power steering | Angle: 43° each direction.
Brakes
Brake System Type
Hydraulically actuated, wet multiple-disc brakes actuate on four wheels
Parking Brake
Wet multiple-disc brake
Operational
Operating Conditions
Hydraulic cycle time Raise: 8.7 s / Dump: 2.3 s / Lower (Empty): 4.1 s
Operating Speed
1st: 4.2 mph / 4.5 mph | 2nd: 7.3 mph (7.7 mph) / 8.0 mph (8.4 mph) | 3rd : 12.6 mph (13.5 mph) / 13.7 mph (14.7 mph) | 4th: 21.0 mph (23.4 mph) / 23.0 mph (25.5 mph)
Hydraulics
Pump Type
Piston pump
Hydraulic Flow
Steering Capacity: 43.1 US gpm | Loader Control capacity: 63.1 + 63.1 US gpm
Relief Valve Setting
Steering: 4,980 psi | Loader control: 4,980 psi
Dimensions
Turning Radius
23 ft. 3 in
Capacities
Cooling System
39.6 US gal
Fuel Capacity
tank: 189.7 US gal
Hydraulic Capacity
117.0 US gal
Axle Capacity, Front
48.9 US gal
Axle Capacity, Rear
51.0 US gal
Features
Engine: 22.7 US gal | Torque converter and transmission: 20.6 US gal | DEF tank: 10.5 US gal
Features
Features
Filter: Full-flow type | Control valve: 2-spool type | Boom: Raise, hold, lower, and float | Bucket: Tilt-back, hold, and dump