2024 Komatsu Excavators PC35MR-5
- Year 2024
- Make Komatsu
- Model Excavators
- Engine Model: 3D88E-7
2024 Komatsu Excavators PC35MR-5
2024 Komatsu Excavators PC35MR-5
Engine
Engine Manufacturer
Komatsu
Engine
Model: 3D88E-7
Cooling
Water-cooled | Fan drive method for radiator cooling: Mechanical
Cylinder Liners
3
Bore
3.46 in | Hydraulic cylinders Boom: 3.35 in | Hydraulic cylinders Arm: 2.9 in | Hydraulic cylinders Bucket: 2.55 in | Hydraulic cylinders Boom swing: 3.74 in | Hydraulic cylinders Blade: 3.74 in
Stroke
3.54 in | Hydraulic cylinders Boom: 22.0 in | Hydraulic cylinders Arm: 23.4 in | Hydraulic cylinders Bucket: 19.29 in | Hydraulic cylinders Boom swing: 18.97 in | Hydraulic cylinders Blade: 5.51 in
Displacement
Piston: 100.2 in³
Engine Power
SAE J1995 - Gross: 24.4 HP | ISO 9249 / SAE J1349 - Net: 24.4 HP
Rated Engine Speed
2,200 rpm
Motor
Motor Type
Travel: Variable displacement piston x 2 (with counterbalance valve and travel shaft brake) | Swing: Fixed displacement piston type x 1 (with brake valve and swing shaft brake)
Fuel System
Fuel Injection
direct
Drivetrain
Steering
control: Two levers with pedals
Drive System
method: Hydrostatic
Brakes
Brake System Type
Hydraulic lock
Parking Brake
Mechanical disc
Operational
Operating Conditions
Gradeability: 30° | Maximum drawbar pull: 7,495 lbf.
Operating Speed
High: 2.85 mph | Low: 1.61 mph
Ground Pressure
ROPS canopy, rubber belt track 12” ISO 16754: 5.20 psi | ROPS cab, rubber belt track 12” ISO 16754: 5.07 psi
Hydraulics
Pump Type
Pumps for: Boom, arm, bucket, and travel circuits | Type: Variable displacement piston x 2 | Pumps for: Swing and blade | Type: Gear x 2
Hydraulic Flow
Maximum flow: 18.3 gpm | Max auxiliary flow rate at 20.5 MPa / 2,973 psi: 13.2 gpm
Hydraulic Pump
Swing pump maximum flow: 4.9 gpm | Blade pump maximum flow: 2.61 gpm
Maximum Pressure
Swing: 2,915 psi | Blade: 3,118 psi
Hydraulic Type
valve: 8 spool | Operating method: Hydraulic assist
Chassis
Frame Type
Center frame: X-frame | Track frame: Box-section
Dimensions
Dimensions
Hydraulic cylinders Boom (rod diameter): 1.97 in | Hydraulic cylinders Arm (rod diameter): 1.77 in | Hydraulic cylinders Bucket (rod diameter): 1.57 in | Hydraulic cylinders Boom swing (rod diameter): 1.97 in | Hydraulic cylinders Blade (rod diameter): 1.77 in
Width
Blade: 5 ft. 9 in
Height
Blade: 1 ft. 2 in
Capacities
Fuel Capacity
Engine: 1.77 US gal | tank: 10.8 US gal | Final drive (each side): 0.15 US gal
Hydraulic Capacity
5.3 US gal
Cooling System
0.87 US gal
Weights
Weight, In Running Order
ROPS canopy, rubber belt track 12”: 8,201 lbs. | ROPS cab, rubber belt track 12”: 8,532 lbs.
Features
Track Type
Sealed | adjuster: Greased gun
Features
Number of carrier rollers (each side): 1 | Number of track rollers (each side): 4