2023 Komatsu Excavators PC290LCi-11
- Year 2023
- Make Komatsu
- Model Excavators
- Engine Model: SAA6D107E-3 | Fan drive type: Mechanical
2023 Komatsu Excavators PC290LCi-11
Leave nothing behindExpect first-to-last-pass accuracy in a stable and productive machine across multiple applications, without the transportation-permit headaches of bigger machines. The 5th intelligent machine control excavator in the Komatsu family, the PC290LCi-11 leverages proven technology that minimizes over-excavation and leaves nothing behind but a clean and accurate graded surface.
Features may include:
- Large high-strength steel castings on the boom, arm and bucket link.
- Closed-center load-sensing hydraulics for precise, fine control.
- Large displacement high-efficiency pumps provide optimal attachment flow.
- Large, spacious, quiet cab featuring standard air suspension seat.
- A fully integrated grade assist automatically traces the target surface to minimize over digging. A built-in facing angle compass ensures the machine is aligned with the target surface.
- To help eliminate potential damage during boom or bucket operation, the machine automatically stops when the bucket edge reaches the design surface.
- iMC controls the bucket by automatically selecting the point closest to the target surface, which minimizes operator input while providing higher accuracy and grading confidence.
- For utility customers looking for the utmost precision, the excavator allows your operator to input structure, invert elevations of pipe runs and automatically calculates fall of pipe.
- Your fleet can be environmentally friendly without sacrificing power. Excavators with iMC 1.0 are equipment with a Tier 4 Final certified Komatsu SAA6D107E-3 engine, which features an integrated diesel particulate filter, hydraulically actuated Komatsu variable geometry turbocharger and selective Ccatalytic reduction system.
- Stroke sensing hydraulic cylinders provide real-time position that is immediately displayed to the operator. This is an improvement over conventional aftermarket machine guidance (indicate only) systems with tilt sensors that require time to stabilize.
- A large counterweight and robust undercarriage components help provide outstanding stability.
Engine
Engine Manufacturer
Komatsu
Engine
Model: SAA6D107E-3 | Fan drive type: Mechanical
Engine Type
Water-cooled, 4-cycle, direct injection
Aspiration
Komatsu variable geometry turbocharged, aftercooled, cooled EGR
Cylinder Liners
6
Bore
4.21 in
Stroke
4.88 in
Displacement
408 in³
Engine Power
SAE J1995 : Gross 213 HP | ISO 9249/SAE J1349 : Net 196 HP
Rated Engine Speed
Rated: 2,050 rpm
Motor
Motor Type
Hydraulic motors Travel: 2 x axial piston motor with parking brake | Hydraulic motors Swing: 1 x axial piston motor with swing holding brake
Drivetrain
Governor
All-speed control, electronic
Steering
control: Two levers with pedals
Drive System
method: Hydrostatic | Swing Driven method: Hydrostatic
Brakes
Brake System Type
Hydraulic lock | Holding brake/Swing lock: Mechanical disc brake
Parking Brake
Mechanical disc brake
Operational
Operating Conditions
Maximum drawbar pull: 56,000 lbf. | Gradeability: 70%, 35° | Swing torque: 64,292 ft.-lbs.
Operating Speed
Maximum travel speed: High: 3.4 mph/ Mid: 2.5 mph / Low: 1.9 mph | Swing: 10.5 rpm
Ground Pressure
Triple-Grouser Shoes Shoes 28 in: 7.48 psi | Triple-Grouser Shoes Shoes 31.5 in: 6.63 psi | Triple-Grouser Shoes Shoes 33.5 in: 6.28 psi
Performance
Noise Level
Exterior – ISO 6395: 104 dB(A) | Operator – ISO 6396: 70 dB(A)
Hydraulics
Hydraulic Type
HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves | Number of selectable working modes: 6
Pump Type
Main pump: Type: Variable displacement piston type / Pumps for: Boom, arm, bucket, swing, and travel circuits | Supply for control circuit: Self-reducing valve
Hydraulic Flow
Maximum flow: 126.5 US gpm
Maximum Pressure
Implement circuits: 5,400 psi | Travel circuit: 5,400 psi | Swing circuits: 4,190 psi | Pilot circuit: 470 psi
Chassis
Frame Type
Center frame: X-frame | Track frame: Box-section
Dimensions
Bore
Hydraulic cylinders/Number of cylinders: (Boom / 2: 5.5 in | Arm / 1: 5.9 in | Bucket / 1: 5.5 in)
Stroke
Hydraulic cylinders/Number of cylinders: (Boom / 2: 51.2 in | Arm / 1: 64.3 in | Bucket / 1: 39.7 in)
Dimensions
Hydraulic cylinders/Number of cylinders rod diameter: (Boom / 2: 3.9 in | Arm / 1: 4.3 in | Bucket / 1: 3.9 in)
Capacities
Fuel Capacity
tank: 105.7 US gal | Engine: 6.1 US gal | Final drive, each side: 2.1 US gal | Swing drive: 1.9 US gal | DEF tank: 6.1 US gal
Cooling System
9.5 US gal
Hydraulic Capacity
tank: 34.9 US gal | system: 66.8 US gal
Weights
Weight, In Running Order
Triple-Grouser Shoes Shoes 28 in: 70,702 lbs. | Triple-Grouser Shoes Shoes 31.5 in: 71,540 lbs. | Triple-Grouser Shoes Shoes 33.5 in: 72,091 lbs.
Features
Features
Swing reduction: Planetary gear | Swing circle lubrication: Grease-bathed | Track type: Sealed track | Track adjuster: Hydraulic | Number of shoes: 48 each side | Number of carrier rollers: 2 each side | Number of track rollers: 8 each side