2024 Komatsu Excavators PC2000-11
- Year 2024
- Make Komatsu
- Model Excavators
- Engine Model: SAA12V140E-7
2024 Komatsu Excavators PC2000-11
Productive and efficient loadingThe PC2000-11 can load more trucks per shift. Increased engine power, a more efficient hydraulic system and new engine-pump control logic provide faster cycle times and improved multifunction performance.*
Features may include:
Greater productivity- High production fuels an eight percent decrease in production costs ($/ton) compared to previous models. The new “Power Plus” operating mode delivers nine percent more engine horsepower. New engine-pump control logic and a more efficient hydraulic system.
- Tailor machine performance to your application requirements with four selectable working modes — production increased up to 12% with Power Plus mode over previous models.
- The 45-degree, hydraulically actuated boarding ladder for operators offer better accessibility and stability when boarding. Platforms and handrails make scheduled maintenance easier.
- Heated air suspension seat and suspension-mounted controls deliver operator comfort. Noise suppression provides low, cabin noise levels of 64.1 dbA. New, large-capacity air conditioning system. High resolution 7-inch monitor with rearview camera. Trainer seat standard.
- Provide your operator with a 360-degree view of the surrounding work area on a dedicated 10.4-inch LCD monitor. Standard KomVision seven-camera system can improve situational awareness, which promotes Zero Harm.
- To help you minimize downtime and boost production, major components are located within the power modular, which can be quickly removed and replaced or rebuilt. Ground-level service, centralized for fuel, oil, greasing and coolant hydraulically raises and lowers at the rear of machine.
Engine
Engine Manufacturer
Komatsu
Engine
Model: SAA12V140E-7
Cooling
Water-cooled | Fan drive method for radiator cooling: Hydraulic
Cylinder Liners
12
Bore
5.51 in | Hydraulic cylinders Boom: 11.8 in | Hydraulic cylinders Arm: 9.8 in | Hydraulic cylinders Bucket: 7.9 in
Stroke
6.50 in | Hydraulic cylinders Boom: 104.2 in | Hydraulic cylinders Arm: 84.2 in | Hydraulic cylinders Bucket: 85.4 in
Displacement
Piston: 1,860 in³
Engine Power
SAE J1995 - Gross: 1,065 HP | ISO 9249 / SAE J1349 - Net: 1,046 HP
Rated Engine Speed
1,800 rpm
Engine Type
4-cycle,
Aspiration
Turbocharged, aftercooled, cooled, EGR
Lubrication
Swing circle lubrication: Grease-bathed
Engine Torque, Maximum
Swing torque: 154,481 ft.-lbs.
Motor
Motor Type
Travel: 2 x axial piston motors with parking brake | Swing: 2 x axial piston motors with swing holding brake
Fuel System
Fuel Injection
direct
Drivetrain
Governor
All-speed, electronic
Gears
Travel: Two levers with pedals | Swing: 2 x Planetary gear
Brakes
Brake System Type
Swing holding brakes: Mechanical disc brake
Parking Brake
Oil disc brakes
Operational
Operating Conditions
Gradeability: 70%, 35° | Maximum drawbar pull: 93,250 lbf.
Operating Speed
Maximum travel: 1.7 mph | Swing: 4.8 rpm
Ground Pressure
Double grouser 32 in: 27.9 psi | riple grouser 40 in: 22.8 psi
Performance
Noise Level
Exterior – ISO 6395: 104 dB(A) | Operator – ISO 6396: 73 dB(A)
Hydraulics
Pump Type
Variable capacity piston pumps | Pumps for: Boom, arm, bucket, swing, and travel circuits | Sub-pump for control circuit: Gear type
Hydraulic Flow
Maximum flow for attachment, swing and travel: 612 gpm | Maximum flow for fan drive: 85.6 gpm
Relief Valve Setting
Backhoe: 4 270 psi | Travel circuit: 4 760 psi | Swing circuit: 4 270 psi | Pilot circuit: 464 psi
Chassis
Frame Type
Center frame: H-leg | Track frame: Box-section
Capacities
Fuel Capacity
Engine: 33.8 US gal | tank: 898.3 US gal | Travel gear, each side: 22.5 US gal | Swing drive: 2 x 7.9 US gal | Power Take Off (PTO): 10.6 US gal
Hydraulic Capacity
343.5 US gal
Cooling System
Radiator: 63.4 US gal
Weights
Weight, In Running Order
Double grouser 32 in: 445,054 lbs. | riple grouser 40 in: 454,134 lbs.
Features
Track Type
adjuster: Grease
Features
Number of shoes (each side): 49 | Number of carrier rollers (each side): 3 | Number of track rollers (each side): 8