2023 Komatsu Excavators PC130-11
- Year 2023
- Make Komatsu
- Model Excavators
- Engine Model: SAA4D95LE-7
2023 Komatsu Excavators PC130-11
Powerful and nimbleEasily transport your machine with Komatsu’s powerful but nimble 97.2 HP conventional tail swing excavator. Thoughtfully designed for customers who want durability, reliability and productivity, the PC130-11 is a smaller, entry-level machine that can handle a wide variety of utility work or small construction jobs — and fit the changing needs of your business as it grows.
Features may include:
- Lightweight and powerful
- 12% less fuel than the previous model
- Looking to reduce fuel consumption? This machine uses up to 12% less fuel than the previous model, with six working modes to help you optimize productivity and fuel efficiency.
- Thoughtfully designed to be under 29,000 lbs., the PC130-11 is nimble and can easily handle a wide variety of utility work or small construction jobs, providing a versatile workhorse for you as your business expands and grows.
- High arm and bucket digging forces to optimize overall performance.
- Durable steel castings in the boom foot, boom nose and arm tip help spread working loads away from high-stress areas providing improved long-term durability.
- Limit unnecessary fuel consumption with Komatsu’s auto-idle shut down feature that can be set to automatically stop the engine after a preset amount of idle time
- A large one-piece hood, ground-level grease points, engine oil and fuel filters provide quick-and-easy service access.
Engine
Engine Manufacturer
Komatsu
Engine
Model: SAA4D95LE-7
Engine Type
Water-cooled, 4-cycle, direct injection
Aspiration
Variable flow, turbocharged, air-to-air aftercooled
Cylinder Liners
4
Bore
3.74 in
Stroke
4.53 in
Displacement
199 in³
Engine Power
SAE J1995 / Gross: 97.3 HP | ISO 9249 / SAE J1349 / Net: 97.2 HP | Fan at maximum speed /Net: 90.9 HP
Rated Engine Speed
Rated: 2,050 rpm
Cooling
Fan drive method for radiator cooling: Mechanical with viscous clutch
Motor
Motor Type
Hydraulic motors Travel: 2 x piston motor with parking brake | Hydraulic motors Swing: 1 x piston motor with swing holding brake
Drivetrain
Governor
All-speed control, electronic
Steering
control: Two levers with pedals
Drive System
method: Fully hydrostatic | Driven by: Hydraulic motor
Brakes
Brake System Type
Hydraulic lock
Parking Brake
Wet, multiple-disc
Operational
Operating Conditions
Maximum drawbar pull: 27,560 lbf. | Gradeability: 70%, 35° | Swing torque: 21,627 ft.-lbs.
Operating Speed
Maximum travel speed: High: 3.4 mph / Low: 1.8 mph | Swing: 11.0 rpm
Ground Pressure
Grouser 20 in Road Liner ISO 16754: 5.77 psi | Grouser 24 in TripleISO 16754: 4.83 psi | Grouser 28 in Triple ISO 16754: 4.20 psi
Performance
Noise Level
Exterior – ISO 6395: 101 dB(A) | Operator – ISO 6396: 71 dB(A)
Hydraulics
Hydraulic Type
HydrauMind (Hydraulic Mechanical Intelligence) system, closed-center system with load sensing valve and pressure compensated valve | Number of selectable working modes: 6
Pump Type
Main pump: Type: Variable capacity piston type / Pumps for: Boom, arm, bucket, swing, and travel circuits
Hydraulic Flow
Maximum flow: 64 US gpm | Maximum Auxiliary Flow at 250 kgf/cm2 3,553 psi: 64 US gpm
Maximum Pressure
Implement circuits: 5,050 psi | Travel circuit: 5,050 psi | Swing circuits: 4,240 psi | Pilot circuit: 470 psi
Chassis
Frame Type
Center frame: X-leg frame | Track frame: Box-section
Dimensions
Bore
Hydraulic cylinders/Number of cylinders: (Boom / 2: 4.1 in | Arm / 1: 4.3 in | Bucket / 1: 3.7 in)
Stroke
Hydraulic cylinders/Number of cylinders: (Boom / 2: 41.5 in | Arm / 1: 46.3 in | Bucket / 1: 34.8 in)
Dimensions
Hydraulic cylinders/Number of cylinders rod diameter: (Boom / 2: 2.76 in | Arm / 1: 2.95 in | Bucket / 1: 2.56 in)
Capacities
Fuel Capacity
tank: 66 US gal | Engine: 3.0 US gal | Final drive, each side: 0.55 US gal | Swing drive: 0.7 US gal | DEF tank: 5.6 US gal
Cooling System
4.6 US gal
Hydraulic Capacity
tank: 18.2 US gal
Weights
Weight, In Running Order
Grouser 20 in Road Liner: 28,064 lbs. | Grouser 24 in Triple: 28,219 lbs. | Grouser 28 in Triple: 28,660 lbs.
Features
Features
Swing reduction: Planetary gear | Swing circle lubrication: Grease-bathed | Swing lock: Wet, multiple-disc brake | Track type: Sealed track | Track adjuster: Hydraulic | Number of shoes: 43 each side | Number of carrier rollers: 1 each side | Number of track rollers: 7 each side