2024 Komatsu Entry Development 14CM09
- Year 2024
- Make Komatsu
- Model Entry Development
2024 Komatsu Entry Development 14CM09
2024 Komatsu Entry Development 14CM09
Create entry roads in mid seams fasterEfficiently create mid-seam entry roads by cutting gate roads and bolting the roof. Especially suited for the Pittsburgh seam, when center bolting can be completed after the gate road has been strapped and bolted.
Features may include:
Roof and rib bolters- For bolting the entry after cutting, an auger-style roof bolter is equipped on each side of the miner. Drill rolls are available, as are wet and dry drilling options, depending on operations and conditions.
- Centrifugal loading arm (CLA) design for particularly effective loading. Extendable wings and multiple widths to match your operational needs. For longevity, gathering head deck plated with chromium-carbide overlay (CCO); multiple materials available for wear shoes.
- Universal Joy conveyor links prolong chain life; cam-style adjusting mechanism compensates for chain slack as the conveyor swings. CCO-plated conveyor deck plates for longevity. Dual sprocket conveyor chain for strength and reduced noise.
- For ease of operation, greater flexibility when cutting corners with hydraulic cutterhead extensions on each side retract, enabling efficient withdrawals.
- Help optimize your operation with actionable insights. Operator assistance tools, automated sequences, advanced diagnostics and machine performance monitoring from the Faceboss Control System.
Motor
Motor Power
Cutter motor x 2: 235 HP | Gathering head motor x 2: 67 HP | Traction motor x 2: 80 HP | Pump motor x 2: 54 HP | Total HP: 827 HP
Electric
Electrical
Voltage: 950 V, 60 Hz
Operational
Ground Pressure
32 psi
Operating Speed
Traction: 65 fpm max | Gathering head disc: 54 rpm | Conveyor chain: 475 fpm
Top Speed
Bit: 683 fpm
Dimensions
Length
Machine: 35 ft. 3 in | Conveyor: 10 ft. nominal
Ground Clearance
12 in
Width
Crawler Chain: 20 in | Conveyor: 30 in
Dimensions
Cutterhead diameter: 43.5 in | Roof drill-to-pick-tip distance: 12 ft. 2 in | Drill center distance: 8 ft. 10 in
Cutting Width
16 ft. 0 in
Height
Min cut: 4 ft. 10 in | Max cut: 10 ft. 11 in | TRS: up to 11 ft. 1 in | Drill: up to 7 ft. 10 in | Timber jack: 10 ft. 10 in
Weights
Weight
Machine: 140,000 lbs.
Features
Features
Roof bolters: 2 standard HGX – MK2